Miller Dynasty 300 DX TIG Welder +Coolmate water cooler, and Remote Fo for sale in Dallas, Texas

$1,800

The Dynasty 300 Series combines the advantages of advanced inverter technology with the built-in features of a high-end TIG power source offering you superior arc performance. Dynasty's front panel interface has state-of-the-art technology which allows the operator extra set-up capabilities in a compact size machine, and it offers more precise control of output parameters compared to traditional knobs and switches. The DX offers pulse on/off, pulse frequency, peak % time, background amperage, initial amperage, initial slope time, final slope time and final amperage control. Includes Dynasty 300 DX, Coolmate water cooler, and Remote Foot Control. Also a 250 Amp Water-Cooled Torch, Work Clamp, 10 ft Gas Hose, Regulator/Flowmeter and gas Cylinder. 250 A at 30 V, 40% Duty Cycle (AC) 200 A at 28 V, 40% Duty Cycle (DC) Pulsed TIG (GTAW-P) Welding with DX and LX models * DX - When the job demands greater control the DX provides pulse on/off, pulse frequency, peak % time, background amperage, initial amperage, initial slope time, final slope time and final amperage control * Single- or three-phase input power * Portable, 90 lb (41 kg) power source gives you the freedom to easily move anywhere * Advanced Squarewave arc stabalizes the arc on low magnesium. Continuous high frequency is NOT needed because of the advanced Squarewave arc. Extended balance control allows you to fine-tune the duration of the electrode negative portion of the cycle from 50 to 90%. This provides precise cleaning control and prolonged tungsten life. * AC frequency control range of 20 - 250 Hz provides control for a focused arc, resulting in better directional control to help produce the desired arc/weld bead characteristics (Built-in pulser reduces heat input; adds arc) * Memory recall stores up to 4 weld procedures per process * Unique Lift-Arc helps in TIG starting * Auto-Link automatically links the power source to the primary input voltage * Fan-On-Demand cooling system only operates when needed * Fan-On-Demand - Internal power source cooling system that only works when needed, keeping internal components cleaner. * Auto-Link - Automatically links the power source to the primary input voltage being applied (230v-260v 1pz) or (230V or 460V3pz), without the need for manually linking primary voltage terminals. * LVC Line Voltage Compensation - Keeps output of the power source constant regardless of fluctuation in input power + OR - 10%. * Wind Tunnel Technology - Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability. * Hot Start - Used on some Stick (SMAW) machines to make it easier to start difficult-to-start electrodes. Used for arc starting only. * Lift-Arc - Simply touch the tungsten to the work piece...lift...and the arc is initiated instantly and automatically. * Squarewave - The AC output of a power source that has the ability to rapidly switch between the positive and negative half cycles of alternating current. * Adaptive Hot Start for Stick - Automatically increases output amerage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion.


Similar categories
Nearby Cities
Copyright © 2024 Americanlisted.com, All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.